Automatic Price Sticker & Hang Tag Attaching Machine
Automatic Price Sticker & Hang Tag Attaching Machine
The Automatic Price Sticker & Hang Tag Attaching Machine applies price stickers and fixes hang tags onto finished garments in one pass. The operator places the product, and the machine prints or picks the sticker, presses it in place, and attaches the hang tag with a fastener. It suits garment, footwear, and accessory lines that pack many SKUs and need fast, error-free tagging before shipment.
| Specification | Value |
| Length | 2000 mm |
| Width | 1600 mm |
| Height | 1600 mm |
| Voltage | 220V, 50Hz |
| Air Pressure | 0.6 MPa |
Automatic Price Sticker & Hang Tag Attaching Machine
Product Overview:
Tagging is the last step before packing, and it often becomes the slowest one. Workers peel each sticker by hand, press it on, then loop a hang tag through the garment with a tag gun. On a busy line, stickers land crooked, tags go on the wrong item, and the whole packing area backs up.
This machine takes over that work. The sticker unit feeds and presses each label at a fixed point, so every price tag sits straight. Then the attaching head fixes the hang tag with a plastic fastener or string in the same motion. The operator only positions the product and takes it away.
Because the control panel stores several jobs, you can switch from one SKU to another in seconds. Just call up the saved setting, and the sticker size, position, and tag type change with it. So one machine can tag a full order of mixed styles without a long reset.
The sensor checks that each product is in place before the cycle starts, and it skips empty positions. Moreover, the counter tracks output in real time, which helps you match tagged units against the packing list.
Buyers usually judge this machine on speed and accuracy. One operator here can replace two or three manual tagging stations, and wrong-tag errors drop close to zero. That matters most in export orders, where a single mismatched price or tag can hold up a whole shipment.
The frame is compact and fits into any packing area. Cleaning is quick, and spare parts stay standard, so your team keeps it running with little effort.
Product Features
- Automatic sticker feeding – Price stickers feed and press without hand peeling
- Hang tag attaching head – Fixes tags with fastener or string in one motion
- Programmable jobs – Store sticker size, position, and tag type per SKU
- Touch screen control – Set position, count, and tag mode on screen
- In-place sensor – Starts only when the product sits in position
- Real-time counter – Tracks tagged units against your packing list
- Fast changeover – Switch SKUs in seconds from saved settings
- Compact frame – Fits into any packing or finishing area
- Safety guard – Protects the operator during each cycle
- Low training need – New operators run it within one shift
Key Features
1. Fully Automatic Tagging
The machine feeds, presses the sticker, and attaches the hang tag without manual peeling or looping.
2. Straight, Accurate Placement
A fixed press point keeps every price sticker and tag in the same spot on each product.
3. Higher Packing Speed
One operator only loads and unloads, so tagged output per station rises without extra staff.
4. Quick SKU Changeover
Saved jobs switch sticker size, position, and tag type in seconds.
5. Simple Touch Screen Setup
Set position, count, and tag mode on screen. New operators learn it in one shift.
6. Built-in Sensor and Counter
The sensor skips empty spots, and the counter matches output to the packing list.
7. Works With Many Product Types
Handles garments, footwear, and accessories with sticker, string, or fastener tags.
Frequently Asked Questions:
Automation cuts down manual handling, so each unit moves through the line faster. It also holds stitch quality steady from the first piece to the last. Because the machine doesn't get tired or lose focus, error rates drop and output stays consistent. Factories running our machines typically see lower labor costs too, since one operator can manage work that used to take several hands.
Yes. Naxtsew machines are built for continuous, shift-after-shift operation, not occasional use. If you're running a medium or high-volume apparel line, this is the kind of load they're designed for. Factories running two or three shifts a day rely on this same durability.
Our team provides setup guidance, operator training, and ongoing technical support. If a part needs replacing, we can supply it directly. So you're not left waiting on a third party once the machine is running.
Yes. We offer OEM and ODM options, which means we can adjust specs, tooling, and output speed to match your production line. Because every factory works differently, we start with your fabric type and volume needs before recommending a build.
We sell direct from the factory. This cuts out the markup you'd pay through a distributor, so you get factory pricing and direct support from our team. If you need parts, training, or service later, you're talking to us, not a middleman.
Lead times depend on the machine type and whether it's a standard build or a custom OEM/ODM order. [Insert your actual lead time range here — e.g., "4 to 8 weeks"]. Once you place an order, our team will give you a specific timeline based on your build.